S700MC

          EN 10149-2

MICRO-ALLOYED, FINE-GRAINED, THERMO-MECHANICALLY ROLLED HIGH STRENGTH STEEL FOR COLD FORMING.

S700MC combines a minimum yield strength of 700 MPa with high tensile strength and good impact toughness.

 

AdobeStock_433796665.jpg
 
The high yield strength enables improved load bearing capacity in combination with weight reduction of components and/or structures. 
The use of S700MC opens possibilities for advanced, innovative design with reduced steel thickness.
S700MC offers excellent cold forming properties and weldability. Overall processing becomes easy and efficient.
 
Reduced steel thickness translates immediately into increased payload and savings on fuel consumption.
Many applications in the (heavy) transport sector may enjoy the economic benefits.
The upgrade from lower yield strength steels to S700MC supports you in your ambitions to reduce CO2 footprint. 
AdobeStock_452373541.jpg

Chemical composition (EN 10149-2)

  C Mn Si P S Also Nb V Ti Mo B
% min. - - - - - ≥ 0,015 - - - - -
% max.

≤ 0,12

≤ 2,10 ≤ 0,60 1

≤ 0,025

≤ 0,015

≥ 0,090

≤ 0,09

≤ 0,20

≤ 0,22

≤ 0,50

≤ 0,005

1 If hot-dip-galvanizing is required, please check the specific Si-content vbefore placing your order.

Mechanical properties (EN 10149-2)

  Yield strength Tensile strength Elongation Bending radius2
  ReH (MPa) 1 Rm (MPa) 1 A50 (%) 1 (90°) 2
min. 700 750 12 2,0 3 - 2,5 4 x t
max. - 950  - -

1 tested in longitudinal direction 2 in transversie direction 3 thickness 3 < t < 6 mm 4 thickness t > 6 mm.

Impact strength

EN 10149-2 does not prescribe any minimum impact strength values. However, > 40 J at -20 °C or > 27 J at -40 °C are quite common.

Please express your wish when requiring a quote.

Tolerances

Thickness, width, length, shape and flatness acoording to       EN 10051.

Tighter tolerances upon request.

Delivery program from stock

  • Thickness        3 - 20 mm
  • Width               1000 - 2000* mm
  • Length             2000 - 16000 mm
  • Finish               Black / Pickled & Oiled
* depending on thickness

Certification

A mill material certificate according to EN 10203:3.1 comes as default with deliveries of S700MC cut-to-length sheet.

Other certificates available upon request.

Downloads

AdobeStock_501004206.jpg
GettyImages-172303135.jpg
AdobeStock_24936121.jpg
AdobeStock_40914578.jpg